How to properly use and charge the battery in Chinese smartphones?!
In recent years, the market has been flooded with an influx of inexpensive and quite decent smartphones from various Chinese brands! The price of such gadgets is an order of magnitude lower than that of recognized and time-tested global brands such as (Sony, LG, Samsung, Nokia, Motorola, etc.), which bribes the common man. In terms of technology and functionality, Chinese smartphones are not inferior to their expensive counterparts! But there is one natural indicator that distinguishes "Chinese" from famous brands! It's a rechargeable battery! Here, quality is of tangible importance. The absence of many unnecessary, from the point of view of Chinese manufacturers, secondary "controllers and spare parts" reduces the price of the gadget, but also reduces the durability, and sometimes the safety of the device.
Let's consider an illustrative example - " BATTERY EXPLODED ". Why is the battery in Chinese smartphones much more likely to swell and is one of the main reasons for device failure? Answer: the battery is inflated by gases that have accumulated as a result of a chemical reaction. Due to cost reduction, the batteries of Chinese manufacturers and the smartphone itself do not have a "voltage drop" protection controller, and, as is known, modern gadgets are equipped with impulse chargers of SZU with a capacity of 1-2A, which, in turn, significantly speeds up the charging time batteries against the predecessor - "transformer SZU", which charged much more slowly, but smoothly smoothed out network fluctuations. Today's chargers use impulse pulses, and if the impulse increases during a voltage drop in the power grid, then with the lack of "voltage drop controller" protection, the battery begins to blow, sometimes quickly, sometimes slowly. On average, the battery life in a Chinese smartphone is from 3 months. up to 1 year. Moreover, the manufacturer's warranty does not cover the battery! So how to be in this situation?
We suggest you consider a few tips from the Arkada-bt.com catalog, proven by years of work in this field.
How to reduce risks and extend the life of the battery in your gadget?
1. Charge the smartphone-tablet from verified networks, if it is possible to use "Network filters", i.e. sockets connected as protection to devices such as "UPS-UPS-Uninterruptible Power Supply" or "Voltage Stabilizer". The latter is inexpensive and will be a good protection for any expensive equipment in the house.
2. Charge any gadget (if possible) in a switched off state. This is the so-called "smooth battery charge", at this moment the smartphone-tablet is not distracted by the consumption of energy to search for mobile networks, the Internet, etc., which gives it the opportunity in a sparing mode to restore the charge cycle without loads and external interference .
3. It is not recommended to charge the battery to 100% and not to discharge it to 0%, because the cycle is considered complete if the battery is charged from 0 to 100%. Each battery has a number of cycles before using the resource, on average - this is 1500-2000 charges. And if, for example, charging to 98% and discharging to 5% is not considered a full cycle, it means that the total number of charges can be increased by 1.5-2 times, which will allow the battery to work longer!
4. The speed of battery charging depends on the capacity of the SZU, but for a weak gadget, do not use a SZU (mains charger) with increased Amperage. For a smartphone-tablet with a battery with a capacity of 1500-2500mAh, 1.5A charging is sufficient. More than 2800 mAn, etc. - You can use 1.8-2.0A charging.
If, after all, with full compliance with the above rules, your battery has become unusable (it blew up, stopped charging and simply exhausted its resource), the specialists of the arkada-bt.com catalog will help you restore and bring back to life the battery of your favorite smartphone, because during " repackaging " we use high-quality foundations-banks of increased capacity. And, if necessary, we add insufficient technical elements, namely - (voltage drop protection controller, element overheating controller). The warranty for any battery is 6 months.
Technically, it happens like this: Without changing the controller, (that is, the circuit board), the old, manufactured or blown base (can) is removed from the standard battery and replaced with a reinforced new one. The order fulfillment period is 2-3 days.
Repacking is carried out only if your old battery is available! If you are in another city, the battery must be sent to Kyiv!
WARNING!
If you were not able to get in touch, please leave your order in electronic form!
ORDERS PLACED ON THE SITE ARE CONSIDERED FIRST!